Match your soil type and conditions with the harrow section design most suitable to your requirements.
Parallel Harrow Sections
This rigid spike tooth section is designed for excellent leveling action and better trash clearance. The all-channel construction gives extra strength for higher speed harrowing.
Sections available in 40" (20 teeth) and 60" (30 teeth)
The 5/8" square extra long high carbon steel teeth are designed for longer wear.
1 -1/2" channel construction
5/8" square high carbon steel teeth
wt: 40" section - 68 lbs.
60" section - 101 lbs.
40" Hookup
60" Hookup
Flexible Harrow Sections
Spike toothed harrow with flexible design for rough, rocky ground. These sections have reversible hookups to allow you to select either a more aggressive attack for weeding or less aggressive action for better trash clearance.
Tubing:
1-5/16" O.D. welded
Teeth:
5/8" square high carbon steel for longer wear.
Coupler:
Sturdy ductile castings
Weight:
5' section - 89 lbs.
6' section - 98 lbs.
Tine Harrow Sections
Particularly suitable for rocky ground, the tines are designed with extra coil space to reduce breakage. Worn out teeth are easily replaced. Five bar sections only.
A five position adjustment lever varies the angle of the tines.
Tines are 3/8" x 14" straight or kinked.
Drawbar hookup is by means of 3 position U channel with a pin and cotter pin.
2" x 2" x 3/16" angle frame
1-5/8" O.D. x 11 ga. tubing
3/8" x 14" layback type teeth (straight or kinked)
wt: 115lbs
